Antenna & Router Enclosures

Need an enclosure?

ITELITE has got you covered again! Several types of enclosures, each can be changed according to the customer’s needs. Additional options, the possibility of modification and production of new enclosure types.

check it out

Enclosure types

Do you need  just a waterproof enclosure for your router ? Do you need an antenna with radio space ? We will get you the ideal solution for your needs

  • MRAbox

  • PRAbox

  • SRAbox

  • Aluminium enclosure

  • Sector antenna enclosure

MRAbox

MRA antenna enclosure is the smallest housing made from polystyrene by injection molding.
The housing dimensions are 185×185 mm; the usable height in the center of the casing is about 40 mm.
The material is protected against UV rays.
Enclosures of this type are in standard adapted to Mikrotik routers. With the right quantity order, we can provide a housing adapted to any PCB.
MRA housing has an opening of 23.2 mm suited for a waterproof cable gland and/or waterproof RJ45 ethernet connector.
Along with the enclosure, the customer can optionally choose a set of accompanying components such as:
mast mounting, wall mounting, mounting with tilt option, fixing without tilting down,
individual color fo the case, pigtails, grounding cable.
The whole set is made out of the highest quality materials and is intended for use even in the most demanding weather conditions.

 

PRAbox

The PRA enclosure is a medium size case made out of polystyrene by injection molding. Its dimensions are 270×270 mm; the usable height in the center of the casing is about 50 mm. The material is protected against UV rays. Housings of this type are in standard adapted for Mikrotik routers. With the right order quantity we can provide a housing adapted for any PCB. PRA housing has an opening of 23.2/25 mm suited for a waterproof cable gland and/or waterproof RJ45 ethernet connector. It is also possible to provide this enclosure with two holes for the RJ-45 glands, as well as connectors/pigtails mounted on the bottom of the case. Along with the enclosure, the customer can optionally choose a set of accompanying components such as: mast mounting, wall mounting, mounting with tilt option, fixing without tilting down, individual color for the case, pigtails, grounding cable, external omnidirectional antennas, external connectors, led lights, etc. The whole set is made out of the highest quality materials and is intended for use even in the most demanding weather conditions.

 

SRAbox

The SRA enclosure is the largest enclosure made out of polystyrene by injection molding. Its dimensions are 386×386 mm; the usable height in the center of the casing is about 70 mm.
The material is protected against UV rays. Housings of this type are in a standard adapted for Mikrotik routers. With the right order quantity we can provide a housing adapted for any PCB.
SRA housing has an opening of 23.2/25 mm suited for a waterproof cable gland and/or waterproof RJ45 ethernet connector.
It is also possible to provide this enclosure with two holes for the RJ-45 glands, as well as connectors/pigtails mounted on the bottom of the case.
Along with the enclosure, the customer can optionally choose a set of accompanying components such as: mast mounting, wall mounting, mounting with tilt option, fixing without tilting down, individual color for the case, pigtails, grounding cable, external omnidirectional antennas, external connectors, led lights, etc. The whole set is made out of the highest quality materials and is intended for use even in the most demanding weather conditions.

Aluminium enclosure

Solid and durable IP67 housing for electronics attached to panel or sector antennas in different frequencies.
Shields against radio frequency interference RFI and electromagnetic frequency EMF.
Resistant to rusting corrosion.
Each size available with unique hole pattern for waterproof cable gland, waterproof RJ45 ethernet connector and/or vent IP67 solution.
Mast and wall mounting kits available.
5 years warranty

  • Small – ALU-S 212x212x55mm
  • Medium – ALU-M 265x265x54mm
  • Large – ALU-L 287x287x67mm

Sector antenna enclosure

Vacuum forming IP67 housing for electronics, with sector antenna in different frequencies.

UV protected PVC.
High quality construction.
Heavy duty mast mounting elements with easy elevation and tilt adjustments.
Designed for all weather operation.
5 years warranty

  • Small – PRO-SEC 632x158x64mm
  • Medium – PRO-SEC-L 599x216x62mm
  • Large – PRO-SEC-XL 629x260x77mm

OEM

We offer full OEM solution for low and high volume production

  • flexibility during designing process
  • 5 years warranty

For more information or any other question please contact us directly

Contact us

Fill the form and we’ll contact you